Application Areas
Orion Rotate can be used inside every kind of contained and silo and for showing
(detection) of level of every kind of powder and coarse grained materials. There are
8 different torque settings and torque levels are adjusted with three switches.
Selection for application area
In construction industry: lime, fine sand, dolomite, calcite, plaster, cement, stone,
coal etc.
In food industry: milk powder, flour, salt, sugar etc.
In plastic industry: plastic particles etc.
Function
When granulated material covers surroundings of probe in rotary palletized assembly
on end part of motor type level switch; material forms a counter force on palette and
thus rotation of palletized assembly becomes prevented. In this situation, its nonrotation
is detected by a sensor and an output signal is generated. Desired torque
setting is made depending on material density.
Application range
Orion-ROT0103 vibration probe is normally placed into container horizontally
(perpendicular to the surface) and thus it ensures to observe level filling and to keep
level recording.
Technical Data
Electrical Specifications
Connection terminal : Max. 2mm (AWG 12) cable input, M20 x 1,5 screwed cable
record
Signal delay : Max. 30 seconds
Operation : Output with inverter relay
Feeding voltage : From 24V AC/DC to 250VAC/DC, 50-60Hz Max. 6W
Signal output : 1 ea inverter contact, AC Max. 250V, 2A, 500VA resistive load
Protection class : IP67
Mechanical Specifications
Box : Aluminum injection IP67
Probe : IP67
Screw material : DelrinŽ POM-C EN 10204
Screw size : R 1˝. DIN 2999
Rotate material : stainless steel SS304
Material outer surface : stainless cadmium coating
Weight : 1 Kg
Operational conditions
Environment temperature (external environment) :-20°C... +80°C
Operation temperature (material) :-20°C... +100°C
Min. power density : 250 g/l
Max. particle size : 12 mm
Max. mechanical load : 500N laterally (load on probe)
Max. mechanical torque : 200 Nm
Max. tensile force : 2kN
Max. operational pressure : 0,5 bar
Official compatibility
CE compatibility
General purpose compatibility EN 61010-1
EC EN 61326 -A1
|
